Industries We Serve
Laser processing solutions for automotive, aerospace, medical, HVAC, furniture, railways, shipbuilding and more.
Aerospace & Defence
Aerospace and defense manufacturing calls for controlled processing across lightweight metals, high-strength alloys, precision components and complex geometries. Laser technology enables manufacturers to cut, mark, weld and process these materials with high levels of accuracy and repeatability.
Bevel GFA Series cutting 6 mm titanium
Typical materials
Titanium, Inconel, Aluminium, Stainless Steel
Thickness range
0.5 – 25 mm
Tolerance held
±0.03 mm
Certifications
AS9100 documentation support
Precision Cutting
Accurate profiles, fine features and consistent dimensions.
Controlled Heat Input
Stable processing for heat-sensitive alloys and metals.
Repeatable Production
Consistent results across prototypes, small batches and repeat runs.
Permanent Identification
Serial numbers, data matrix codes and part numbers for traceability.
Laser Cutting
Fiber laser cutting systems can process materials such as aluminum, stainless steel, titanium and other metals used in aerospace and defense manufacturing. Different machine configurations allow manufacturers to work with varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable metal components, including serial numbers, part numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining suitable metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can be used for suitable surface preparation and removal applications, including the removal of contaminants, coatings, or oxides from metal surfaces.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of tubular components, profiles and structural parts used in aerospace and defense applications.
Specified for aerospace tolerances and alloy work.
Best seller
Ex-stock
Power
12–30 kW
Bed size
6000 × 2500
Materials
Ti · Inconel · SS
Specified for aerospace tolerances and alloy work.
Ex-stock
Specified for aerospace tolerances and alloy work.
Ex-stock
Power
2 kW
Reach
8 m
Materials
Ti · SS · Al
Automotive
Automotive manufacturing demands consistent processing across body panels, structural components, engine parts, brackets, chassis components and other metal assemblies. Laser technology supports high-speed cutting, marking, welding and processing across different materials and production requirements.
GH Series cutting 3 mm high-strength steel
Typical materials
Mild Steel, Stainless Steel, Aluminum, Galvanized Steel
Thickness range
0.8 – 12 mm
Tolerance held
±0.05 mm
Certifications
IATF 16949 process support
High-Speed Cutting
Fast, accurate cutting for automotive components and production parts.
Consistent Quality
Stable processing across high-volume production runs.
Complex Geometries
Accurate profiles for brackets, panels, chassis parts and formed components.
Permanent Identification
Serial numbers, part numbers, barcodes and other identification marks for traceability.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and galvanized steel used across automotive manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on automotive components, including serial numbers, part numbers, barcodes, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible automotive components where controlled and precise welding is required.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of chassis components, structural parts, exhaust components and other tubular automotive parts.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal components.
Built for takt-time cutting on automotive lines.
Best seller
Ex-stock
Built for takt-time cutting on automotive lines.
Ex-stock
Built for takt-time cutting on automotive lines.
Fabrication & Sheet Metal
Fabrication and sheet metal manufacturing involve diverse materials, component sizes, thicknesses and geometries. Laser technology supports accurate cutting, marking, welding and processing across fabrication and sheet metal applications.
C Series cutting 10 mm mild steel
Typical materials
Mild Steel, Stainless Steel, Aluminum, Galvanized Steel
Thickness range
0.5 – 25 mm
Tolerance held
±0.1 mm
Certifications
ISO 9001 process support
Accurate Cutting
Clean, precise profiles for components across different sizes and thicknesses.
Flexible Processing
Efficient processing for varied materials, geometries and production requirements.
Consistent Results
Repeatable cutting and processing quality across production runs.
Permanent Identification
Part numbers, logos, codes and other markings for component identification.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and galvanized steel used in fabrication and sheet metal work. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification, logos, serial numbers, part numbers and machine-readable codes on suitable metal components.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of frames, structural components, profiles and other tubular parts used in fabrication.
Laser Cleaning
Laser cleaning can support surface preparation and removal applications, including contaminants, coatings and oxides from suitable metal surfaces.
The everyday platform for mixed job-shop work.
Best seller
Ex-stock
The everyday platform for mixed job-shop work.
Ex-stock
The everyday platform for mixed job-shop work.
Medical & Healthcare
Medical and healthcare manufacturing requires precise processing of components, instruments, equipment and enclosures. Laser technology supports controlled cutting, marking, welding and processing of suitable materials used across medical applications.
Smart Weld joining 316L stainless instrument bodies
Typical materials
Stainless Steel, Titanium, Aluminum, Mild Steel
Thickness range
0.2 – 6 mm
Tolerance held
±0.02 mm
Certifications
ISO 13485 documentation support
Fine Precision
Accurate cutting and processing for small, detailed medical components.
Clean Processing
Controlled processing for components requiring clean and consistent surfaces.
Complex Geometries
Precise profiles for instruments, components, enclosures and equipment parts.
Permanent Identification
Serial numbers, part numbers, barcodes and other marks for identification and traceability.
Laser Cutting
Fiber laser cutting systems can process materials such as stainless steel, titanium, aluminum and other metals used in medical equipment and component manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable medical components and instruments, including serial numbers, part numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where precise and controlled welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of tubular components, frames, equipment structures and other suitable medical applications.
Chosen for finish and documented process control.
New
Ex-stock
Chosen for finish and documented process control.
Ex-stock
Chosen for finish and documented process control.
Railways & Metro
Railway and metro manufacturing involves large structural components, enclosures, brackets, panels and tubular assemblies. Laser technology supports accurate cutting, marking, welding and processing across rail and transit applications.
Bevel GFA Series preparing 20 mm plate
Typical materials
Mild Steel, Stainless Steel, Aluminum, Galvanized Steel
Thickness range
3 – 30 mm
Tolerance held
±0.15 mm
Certifications
EN 15085 weld-prep support
Large-Format Cutting
Accurate processing of large sheets, plates and structural components.
Structural Precision
Consistent profiles and dimensions for frames, brackets, panels and assemblies.
Repeatable Production
Stable processing across components and repeat production runs.
Permanent Identification
Part numbers, serial numbers, codes and other marks for identification and traceability.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and galvanized steel used in railway and metro manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable railway and metro components, including serial numbers, part numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of structural frames, handrails, profiles, supports and other tubular components used in rail and metro manufacturing.
Sized for structural rail sections and heavy plate.
Best seller
Sized for structural rail sections and heavy plate.
Ex-stock
Sized for structural rail sections and heavy plate.
Electrical & Electronics
Electrical and electronics manufacturing requires accurate processing for enclosures, panels, cabinets, components and assemblies. Laser technology supports precise cutting, marking, welding and processing across a range of electrical applications.
E-Turret perforating 1.5 mm enclosure panels
Typical materials
Mild Steel, Stainless Steel, Aluminum, Copper
Thickness range
0.5 – 6 mm
Tolerance held
±0.1 mm
Certifications
IEC enclosure build support
Fine Cutting
Accurate profiles and small features for electrical components and enclosures.
Precise Openings
Clean, consistent holes, slots and cutouts for panels and assemblies.
Repeatable Production
Consistent processing across components and high-volume production runs.
Permanent Identification
Part numbers, serial numbers, logos and machine-readable codes for identification.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and other suitable metals used in electrical manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable electrical and electronic components, including serial numbers, part numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Sheet Metal Processing
Laser cutting and related sheet metal technologies can support the production of electrical panels, cabinets, enclosures, brackets and other fabricated components.
Set up for enclosure panels and busbar work.
Best seller
Set up for enclosure panels and busbar work.
Ex-stock
Set up for enclosure panels and busbar work.
Ex-stock
HVAC & Refrigeration
HVAC and refrigeration systems rely on accurately fabricated panels, ducts, brackets, heat-exchanger components and enclosures. Laser technology supports efficient cutting, marking, welding and sheet metal processing across these applications.
C Series cutting 1.2 mm galvanised sheet
Typical materials
Mild Steel, Stainless Steel, Aluminum, Galvanized Steel
Thickness range
0.5 – 4 mm
Tolerance held
±0.1 mm
Certifications
ISO 9001 process support
Precise Profiles
Accurate cutting for panels, brackets, ducts and system components.
Clean Cutouts
Consistent holes, slots and openings for assembly and installation.
Repeatable Production
Stable processing across components and production batches.
Permanent Identification
Part numbers, serial numbers, logos and codes for component identification.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and galvanized steel used in HVAC and refrigeration manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable HVAC and refrigeration components, including part numbers, serial numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Sheet Metal Processing
Laser cutting and related sheet metal technologies can support the production of ducts, panels, brackets, housings, enclosures and other HVAC and refrigeration components.
Configured for light-gauge ducting and casings.
Best seller
Ex-stock
Configured for light-gauge ducting and casings.
Ex-stock
Configured for light-gauge ducting and casings.
Furniture & Interior
Metal furniture and interior manufacturing requires accurate cutting, clean profiles and consistent processing across frames, panels, supports and decorative components. Laser technology supports cutting, marking, welding and tube processing for diverse designs and production requirements.
Fiber laser cutting decorative screen panels
Typical materials
Mild Steel, Stainless Steel, Aluminum, Brass
Thickness range
0.5 – 12 mm
Tolerance held
±0.1 mm
Certifications
Architectural finish support
Detailed Cutting
Accurate profiles and intricate patterns for furniture and interior components.
Clean Finishes
Precise cuts and edges for visible and finished metal surfaces.
Design Flexibility
Efficient processing of varied shapes, patterns and component geometries.
Permanent Identification
Logos, product codes, patterns and other markings for identification or decorative applications.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and other suitable metals used in furniture and interior manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent logos, patterns, product identification and decorative details on suitable metal components and surfaces.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible furniture and interior components where controlled and precise welding is required.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of furniture frames, supports, legs, profiles and other tubular components.
Sheet Metal Processing
Laser cutting and related sheet metal technologies can support panels, partitions, brackets, decorative elements and other interior components.
Chosen for smooth, finish-ready weld seams on visible frames.
New
Chosen for visible edges and fine decorative detail.
Ex-stock
Chosen for visible edges and fine decorative detail.
Ex-stock
Kitchen Appliances
Kitchen appliance manufacturing requires accurate processing for panels, housings, frames, brackets and internal components. Laser technology supports precise cutting, marking, welding and sheet metal processing across appliance manufacturing.
C Series cutting 1 mm brushed stainless
Typical materials
Stainless Steel, Mild Steel, Aluminum, Galvanized Steel
Thickness range
0.5 – 4 mm
Tolerance held
±0.08 mm
Certifications
ISO 9001 process support
Precise Cutting
Accurate profiles, openings and cutouts for appliance components.
Clean Edges
Consistent cuts for visible panels, housings and finished surfaces.
Repeatable Production
Stable processing across high-volume appliance production.
Permanent Identification
Serial numbers, product codes, logos and other marks for identification.
Laser Cutting
Fiber laser cutting systems can process materials such as stainless steel, mild steel, aluminum and galvanized steel used in kitchen appliance manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent product identification, logos, serial numbers and machine-readable codes on suitable appliance components.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Sheet Metal Processing
Laser cutting and related sheet metal technologies can support the production of appliance panels, housings, brackets, frames and other fabricated components.
Specified for cosmetic stainless panels and liners.
Best seller
Ex-stock
Specified for cosmetic stainless panels and liners.
Specified for cosmetic stainless panels and liners.
Ex-stock
Marine & Shipbuilding
Marine and shipbuilding manufacturing involves large metal structures, panels, brackets, supports, pipes and fabricated assemblies. Laser technology supports accurate cutting, marking, welding and processing across marine manufacturing requirements.
Bevel GFA Series preparing 25 mm hull plate
Typical materials
Mild Steel, Stainless Steel, Aluminum, High-Strength Steel
Thickness range
4 – 30 mm
Tolerance held
±0.2 mm
Certifications
Class society weld-prep support
Large-Format Cutting
Accurate processing of large sheets, plates and structural components.
Structural Precision
Consistent profiles for panels, frames, brackets, supports and assemblies.
Controlled Welding
Precise joining of compatible metal components and assemblies.
Permanent Identification
Part numbers, serial numbers, codes and other marks for identification and traceability.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and other suitable metals used in marine manufacturing. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable marine components, including serial numbers, part numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of pipes, frames, supports, structural profiles and other tubular components used in marine applications.
Built for heavy marine plate and prepared welds.
Best seller
Built for heavy marine plate and prepared welds.
Built for heavy marine plate and prepared welds.
Ex-stock
Agriculture Machinery
Agricultural machinery manufacturing involves structural frames, brackets, panels, shafts, profiles and other fabricated components. Laser technology supports accurate cutting, marking, welding and tube processing across agricultural equipment production.
GH Series cutting 12 mm wear plate
Typical materials
Mild Steel, Stainless Steel, Aluminum, High-Strength Steel
Thickness range
2 – 25 mm
Tolerance held
±0.15 mm
Certifications
ISO 9001 process support
Heavy-Duty Cutting
Accurate processing of thicker sheets, plates and structural components.
Complex Profiles
Precise cutting for brackets, frames, panels and machine components.
Repeatable Production
Consistent processing across components and production batches.
Permanent Identification
Part numbers, serial numbers, logos and codes for identification and traceability.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and other suitable metals used in agricultural machinery. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable agricultural machinery components, including serial numbers, part numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of frames, supports, profiles, shafts and other tubular components used in agricultural machinery.
Built for thick wear plate and implement structures.
Best seller
Ex-stock
Built for thick wear plate and implement structures.
Built for thick wear plate and implement structures.
Construction & Metal Building
Construction and metal building manufacturing requires accurate processing of structural components, frames, panels, brackets, profiles and fabricated assemblies. Laser technology supports cutting, marking, welding and tube processing across these applications.
Bevel GFA Series cutting structural connection plates
Typical materials
Mild Steel, Stainless Steel, Aluminum, Galvanized Steel
Thickness range
2 – 30 mm
Tolerance held
±0.2 mm
Certifications
EN 1090 fabrication support
Structural Cutting
Accurate processing of sheets, plates, profiles and structural components.
Large-Format Processing
Efficient cutting of large components for structural and metal building applications.
Consistent Fabrication
Repeatable processing across components and production runs.
Permanent Identification
Part numbers, serial numbers, codes and other marks for identification and traceability.
Laser Cutting
Fiber laser cutting systems can process materials such as mild steel, stainless steel, aluminum and galvanized steel used in construction and metal building applications. Different machine configurations support varying sheet sizes, thicknesses and production requirements.
Laser Marking & Engraving
Laser marking can create permanent identification on suitable structural and fabricated components, including part numbers, serial numbers, logos and machine-readable codes.
Laser Welding
Laser welding provides a concentrated heat source for joining compatible metal components where controlled and precise welding is required.
Laser Cleaning
Laser cleaning can support suitable surface preparation applications, including the removal of contaminants, coatings and oxides from metal surfaces.
Tube & Pipe Processing
Tube and pipe laser cutting can support the production of structural frames, columns, supports, profiles and other tubular components used in construction.
Sized for structural plate and connection work.
Best seller
Sized for structural plate and connection work.
Ex-stock
Sized for structural plate and connection work.
Oil & Gas Refineries
Pressure-retaining components, pipework and vessels under inspection. Refinery work carries the highest documentation burden of any sector we serve, and the weld preparation is scrutinised as closely as the weld.
Bevel GFA Series preparing 25 mm pressure plate
Typical materials
Carbon steel, duplex, Inconel, 316L
Thickness range
3 – 30 mm
Tolerance held
±0.1 mm
Certifications
ASME documentation support
Weld preparation is inspected
Pressure work is radiographed, so an inconsistent bevel shows up as a rejected joint on a vessel, not a cosmetic note.
Exotic alloys behave differently
Duplex and Inconel are sensitive to heat input, and getting it wrong changes the metallurgy rather than just the edge.
Full material traceability
Every pressure-retaining part traces back to its heat number, and losing that link means losing the component.
Shutdown windows are fixed
Turnaround work has to be finished inside the outage, so fabrication delays cost refinery production directly.
Repeatable bevels for pressure welds
Machine-cut preparation holds the angle joint after joint, which is what radiographic inspection is looking for.
Controlled heat on duplex and Inconel
Closed-loop power and inert gas protect the metallurgy of the alloy, not just the appearance of the cut.
Heat numbers marked as parts are cut
Inline marking transfers the heat number onto each component before it leaves the sheet, so the link is never broken.
Turnaround capacity when it counts
Fast changeover and stored programs let a shop surge through shutdown work inside the outage window.
Specified for pressure work and inspected welds.
Best seller
Ex-stock
Specified for pressure work and inspected welds.
New
Specified for pressure work and inspected welds.
Industries we serve
Thirteen industries.
One question:
what are you cutting?
Every sector brings its own tolerances, materials and compliance rules. Pick yours to see the challenges we hear most, how we answer them, and which machines do the work.