AL-CROSS 600 F
A mobile fiber laser welding system with up to 1200 W power, 1070 nm wavelength, water cooling and a 0.2–2 mm weld spot size.
- 1200 W Laser power
- 1070 nm Wavelength
- 20 J Max pulse energy
- 0.2–2 mm Weld spot size
Product description
The AL-CROSS 600 F is used for precision welding, hardening, and additive manufacturing. The source information also lists stainless-steel and carbon-steel fabrication, galvanized- steel and aluminum assemblies where supported by the model and process data, sheet- metal enclosures and frames, kitchen and furniture fabrication, and general engineering welding assemblies. To operate the system, inspect the laser head, cooling system, and gas supply before startup. Prepare and fixture the workpieces, select the welding program and material or process parameters, and set the laser power, speed, wobble, and wire- feed parameters where applicable. Check the focus and nozzle position and perform a test weld. Run the welding process while monitoring the weld pool, shielding gas, and machine status. Inspect the finished weld, clean the workpiece and welding area as required, and stop the system according to the operating procedure.
- Laser power up to 1200 W
- 1070 nm fiber laser
- Maximum pulse energy of 20 J
- Weld spot size of 0.2–2 mm
- Water-cooled system
- Integrated intuitive software
- Mobile design
Features
Up to 1200 W Laser Power
The AL-CROSS 600 F provides laser power of up to 1200 W.
Fiber Laser Configuration
The system uses a fiber laser with a wavelength of 1070 nm.
20 J Maximum Pulse Energy
The AL-CROSS 600 F provides maximum pulse energy of 20 J.
0.2–2 mm Weld Spot Size
The system supports a weld spot size ranging from 0.2–2 mm.
Water-Cooled System
The system uses a water-cooled configuration.
Mobile Design
The AL-CROSS 600 F has a mobile design for relocation across different work sites.
Integrated Software
The system is integrated with intuitive software for operation and setup.
Specifications
| Specification | Details |
|---|---|
| Laser Power Up to | 1200 W |
| Laser Wavelength | 1070 nm |
| Maximum Pulse Energy | 20 J |
| Weld Spot Size | 0.2–2 mm |
Maintenance & care
Inspect the welding head, nozzle, protective glass, and optics regularly. Check the cooling system and related connections. Verify the shielding or assist gas supply and connections. Inspect the fiber, torch cable, and electrical connections. Clean spatter from the nozzle and work area. Check the wire feeder and welding consumables where fitted. Follow the manufacturer's service schedule for periodic preventive maintenance.
May we help?
- What type of laser does the AL-CROSS 600 F use?
- The AL-CROSS 600 F uses a fiber laser with a wavelength of 1070 nm and laser power of up to 1200 W.
- What cooling system does the AL-CROSS 600 F use?
- The system uses water cooling to support sustained operation during extended use.
- What applications is the AL-CROSS 600 F designed for?
- The AL-CROSS 600 F is designed for precision welding, hardening and additive manufacturing applications.