A1SE60i
An air-cooled handheld fiber laser welding system with 6,000 W rated power, 0–4 mm laser wobble and up to 6 mm single-side penetration.
- 6,000 W Rated power
- < 38 kg Machine weight
- 0–4 mm Laser wobble
- 6.0 mm Single-side penetration
Product description
The A1SE60i is specified for welding stainless steel, carbon steel, galvanized steel, and aluminum assemblies, including sheet-metal enclosures, frames, kitchen and furniture components, and general engineering assemblies. Before operation, inspect the welding head, cooling system, and gas connections. Prepare and fixture the workpieces, then select the appropriate welding parameters. Set the required laser power and wobble range, check the nozzle position, and perform a test weld before processing. During welding, monitor the weld pool and machine status. After welding, inspect the finished joint, clean the workpiece and welding area, and stop the system according to the operating procedure.
- 4500 W / 6000 W rated power specification
- Continuous and pulsed working modes
- 0–4 mm laser wobble range
- Machine weight below 38 kg
- 0.68 kg welding torch
- 220 VAC input voltage
- Single-side penetration of up to 6.0 mm for stainless steel, carbon steel, and
- Single-side penetration of up to 5.0 mm for aluminum
Features
Handheld Laser Welding Configuration
I-Weld handheld laser welding system configured for the A1SE60i model.
4500 W / 6000 W Rated Power
The supplied technical data lists rated power options of 4500 W and 6000 W for the A1SE40i / A1SE60i models.
Continuous and Pulsed Operation
The machine operates in continuous or pulsed working modes.
0–4 mm Laser Wobble
The system provides a laser wobble range of 0–4 mm.
Compact Machine Design
The machine weighs less than 38 kg and has a volume of less than 0.1 m³.
Lightweight Welding Torch
The welding torch weighs 0.68 kg.
A1SE60i Penetration Reference
Single-side penetration is specified at up to 6.0 mm for stainless steel, carbon steel, and galvanized steel, and up to 5.0 mm for aluminum.
Specifications
| Specification | Details |
|---|---|
| Machine Weight < | 38 kg |
| Machine Volume < | 0.1 m³ |
| Overall Dimensions | 667 × 276 × 542 mm |
| Torch Weight | 0.68 kg |
| Laser Wobble | 0–4 mm |
| Input Voltage | 220 VAC |
| Rated Power | 4500 W / 6000 W |
| Stainless Steel Penetration | 6.0 mm |
| Carbon Steel Penetration | 6.0 mm |
| Penetration | 6.0 mm |
| Aluminum Penetration | 5.0 mm |
Maintenance & care
Inspect the welding head, nozzle, protective glass, and optics regularly. Check the air- cooling condition and verify shielding or assist gas connections. Inspect the fiber, torch cable, and electrical connections for damage or wear. Clean welding spatter from the nozzle and work area. Where applicable, inspect the wire feeder and welding consumables. Follow the manufacturer's recommended maintenance schedule for periodic servicing.
May we help?
- What type of welding system is the A1SE60i?
- The A1SE60i is an air-cooled handheld fiber laser welding system with continuous and pulsed operation.
- What is the rated power of the A1SE60i?
- The A1SE60i has a rated power of 6,000 W and operates with a 220 VAC input.
- What is its maximum single-side penetration?
- The system provides up to 6.0 mm single-side penetration in stainless steel, carbon steel and galvanized steel, and up to 5.0 mm in aluminum.