W12CNC 100x3000
CNC Hydraulic Four Rollers Rolling Machine — 245 Mpa yielding limit of sheet metal, 100 mm max rolling thickness, 80 mm max pre-bending rolling thickness.
- 245 Mpa Yielding Limit of Sheet Metal
- 100 mm Max Rolling Thickness
- 80 mm Max Pre-bending Rolling Thickness
- 3000 mm Max Rolling Width
Product description
The W12CNC-100x3000 is suited for cylindrical and conical sheet rolling, pressure vessels and tanks within its capacity, industrial ducts and fabricated shells, structural and general engineering components, and automotive and heavy-fabrication components. For operation, power up the machine and check the hydraulic and control status. Select the required rolling setup and confirm the material limits. Position the plate between the rollers, set the roller positions and pre-bending parameters, then perform pre-bending and progressively roll the plate to the required radius. Check the formed radius and alignment after the first pass. Complete the rolling cycle, remove the finished component safely, clean the rollers and work area, and shut down according to procedure.
- Supports sheet widths up to 3000 mm
- Rolls sheet metal up to 100 mm thick
- Pre-bending capacity up to 80 mm helps prepare plate edges before rolling
- 850 mm upper roller diameter matches the machine configuration
- 3.5 m/min rolling speed supports controlled forming
- Four-roller arrangement supports controlled plate positioning
Features
100 mm Maximum Rolling Thickness
The W12CNC-100x3000 supports rolling of sheet metal up to 100 mm thick within its specified material and width limits.
80 mm Pre-Bending Capacity
The machine supports pre-bending of sheet metal up to 80 mm thick before the main rolling operation.
3000 mm Rolling Width
A maximum rolling width of 3000 mm allows the machine to process wider plates within its specified capacity.
850 mm Upper Roller Diameter
The 850 mm upper roller is matched to the machine's specified rolling configuration.
120 kW Motor Power
The machine uses a 120 kW motor for its CNC hydraulic four-roller configuration.
Specifications
| Specification | Details |
|---|---|
| Sheet Metal Yield Limit | 245 MPa |
| Max. Rolling Thickness | 100 mm |
| Thickness | 80 mm |
| Max. Rolling Width | 3000 mm |
| Rolling Speed | 3.5 m/min |
| Upper Roller Diameter | 850 mm |
| Motor Power | 120 kW |
Maintenance & care
Inspect the rollers and work-contact surfaces for damage or contamination. Check the hydraulic system, oil level, and connections for leakage. Lubricate bearings, guides, and mechanical points as specified. Inspect roller alignment and drive components, and check the electrical control panel and emergency-stop functions. Keep the sheet-contact area clean and free from chips. Follow the manufacturer's or service provider's preventive maintenance schedule.
May we help?
- What are the main specifications of the W12CNC 100x3000?
- The W12CNC 100x3000 offers 245 Mpa yielding limit of sheet metal, 100 mm max rolling thickness, 80 mm max pre-bending rolling thickness, 3000 mm max rolling width.
- What is the W12CNC 100x3000 used for?
- It is used for Cylindrical and conical sheet rolling, Pressure vessels and tanks within the model's capacity, Industrial ducts and fabricated shells, Structural and general engineering components, Automotive and heavy-fabrication components.
- What maintenance does the W12CNC 100x3000 need?
- Inspect rollers and work-contact surfaces for damage or contamination. Check hydraulic system, oil level and leakage. Lubricate bearings, guides and mechanical points as specified. Inspect roller alignment and drive components.