W12CNC 8x2000
CNC Hydraulic Four Rollers Rolling Machine — 245 Mpa yielding limit of sheet metal, 8 mm max rolling thickness, 6 mm max pre-bending rolling thickness.
- 245 Mpa Yielding Limit of Sheet Metal
- 8 mm Max Rolling Thickness
- 6 mm Max Pre-bending Rolling Thickness
- 2000 mm Max Rolling Width
Product description
The W12CNC-8x2000 is suited for cylindrical and conical sheet rolling, pressure vessels and tanks within its capacity, industrial ducts and fabricated shells, structural and general engineering components, and automotive and heavy-fabrication components. For operation, power up the machine and check the hydraulic and control status. Select the required rolling setup and confirm the material limits. Position the plate between the rollers, set the roller positions and pre-bending parameters, then perform pre-bending before progressively rolling the plate to the required radius. Check the formed radius and alignment after the first pass. Complete the rolling cycle, remove the finished component safely, clean the rollers and work area, and shut down according to procedure.
- Supports sheet widths up to 2000 mm
- Rolls sheet metal up to 8 mm thick
- Pre-bending capacity up to 6 mm helps prepare plate edges before rolling
- 230 mm upper roller diameter matches the machine configuration
- 4.5 m/min rolling speed supports controlled forming
- Four-roller arrangement supports controlled plate positioning
Features
8 mm Maximum Rolling Thickness
The W12CNC-8x2000 can roll sheet metal up to 8 mm thick within its specified material and width limits.
6 mm Pre-Bending Capacity
The machine supports pre-bending of sheet metal up to 6 mm thick to prepare the plate edges before rolling.
2000 mm Rolling Width
A maximum rolling width of 2000 mm supports forming of wider sheets within the machine's specified working range.
230 mm Upper Roller Diameter
The 230 mm upper roller is designed for the machine's specified rolling configuration.
7.5 kW Motor Power
The machine is equipped with a 7.5 kW motor for its hydraulic four-roller rolling configuration.
Specifications
| Specification | Details |
|---|---|
| Sheet Metal Yield Limit | 245 MPa |
| Max. Rolling Thickness | 8 mm |
| Thickness | 6 mm |
| Max. Rolling Width | 2000 mm |
| Rolling Speed | 4.5 m/min |
| Upper Roller Diameter | 230 mm |
| Motor Power | 7.5 kW |
Maintenance & care
Inspect the rollers and sheet-contact surfaces for damage or contamination. Check the hydraulic system, oil level, and connections for leaks. Lubricate bearings, guides, and mechanical points as specified. Inspect roller alignment and drive components, and check the electrical control panel and emergency-stop functions. Keep the sheet-contact area clean and free from chips. Follow the manufacturer's or service provider's preventive maintenance schedule.
May we help?
- What are the main specifications of the W12CNC 8x2000?
- The W12CNC 8x2000 offers 245 Mpa yielding limit of sheet metal, 8 mm max rolling thickness, 6 mm max pre-bending rolling thickness, 2000 mm max rolling width.
- What is the W12CNC 8x2000 used for?
- It is used for Cylindrical and conical sheet rolling, Pressure vessels and tanks within the model's capacity, Industrial ducts and fabricated shells, Structural and general engineering components, Automotive and heavy-fabrication components.
- What maintenance does the W12CNC 8x2000 need?
- Inspect rollers and work-contact surfaces for damage or contamination. Check hydraulic system, oil level and leakage. Lubricate bearings, guides and mechanical points as specified. Inspect roller alignment and drive components.