Laser Technologies

QC11K 10X4000

An NC/CNC hydraulic shearing machine with a 10 mm shearing thickness, 4,000 mm

  • 10*4000 Model
  • 10 mm Shearing Thickness
  • 4000 mm Shearing Width
  • 6–12 Pcs/min Number of Strokes

Product description

The QC11K-10X4000 is suited for sheet-metal cutting, electrical panels and enclosures, HVAC and duct components, automotive and auto-component blanks, and general industrial sheet preparation. For operation, power up the machine and check the hydraulic and control systems. Select the material and thickness settings and verify the blade condition. Set the required backgauge position, place and align the sheet against the gauge, and activate the shearing cycle. Monitor the cut and check the first piece for dimensions and edge condition. Continue production within the machine's specified capacity, then remove cut pieces and scrap before shutting down and cleaning the machine.

  • 10 mm maximum stated shearing thickness
  • 4000 mm maximum stated shearing width
  • 10–800 mm backgauge travel
  • 6–12 Pcs/min stroke rate
  • E21S operating system
  • 15 kW main motor

Features

10 mm Shearing Thickness

Cuts sheet material up to 10 mm thick within the model's stated capacity.

4000 mm Shearing Width

Accommodates sheets up to 4000 mm wide.

10–800 mm Backgauge Stroke

Provides controlled positioning for repeatable cuts.

0.5°–2.0° Shearing Angle

Adjustable angle range for the specified shearing capacity.

6–12 Pcs/min Stroke Rate

Supports production cutting across the specified operating range.

15 kW Main Motor

Provides the required drive power for the machine.

E21S Controller

Controls the machine and backgauge operation.

Specifications

SpecificationDetails
Shearing Thickness10 mm
Shearing Width4000 mm
Number of Strokes6–12 Pcs/min
Backgauge Stroke10–800 mm
Shearing Angle0.5°–2.0°
Main Motor Power15 kW
Dimensions (H × W × L)4600 × 1800 × 2350 mm
Machine Weight9 T
Oil Tank Capacity340 L

Maintenance & care

Inspect and clean the upper and lower blades and cutting area regularly. Check blade condition, clearance, and alignment, and inspect the hydraulic oil level for leaks. Check the backgauge mechanism, guide components, servo drive, electrical and control panel, and emergency-stop circuit. Lubricate mechanical points as required and follow the manufacturer's service schedule for blade and hydraulic maintenance.

May we help?

What is the maximum shearing thickness of the QC11K - 10X4000?
The machine has a maximum shearing thickness of 10 mm.
What is the maximum shearing width?
The maximum shearing width is 4,000 mm.
What is the back barrier stroke range?
The back barrier stroke ranges from 10 to 800 mm.

More in Shearing Machine

Request a quote for the QC11K 10X4000