Laser Technologies

QC11K 25X2500

An NC/CNC hydraulic shearing machine with a 25 mm shearing thickness, 2,500 mm

  • 25*2500 Model
  • 25 mm Shearing Thickness
  • 2500 mm Shearing Width
  • 5–10 Pcs/min Number of Strokes

Product description

The QC11K-25X2500 is suited for sheet-metal cutting, electrical panels and enclosures, HVAC and duct components, automotive and auto-component blanks, and general industrial sheet preparation. For operation, power up the machine and check the hydraulic and control systems. Select the material and thickness settings and verify the blade condition. Set the required backgauge position, place and align the sheet against the gauge, and activate the shearing cycle. Monitor the cut and check the first piece for dimensions and edge condition. Continue production within the machine's specified capacity, then remove cut pieces and scrap before shutting down and cleaning the machine.

  • 25 mm maximum stated shearing thickness
  • 2500 mm maximum stated shearing width
  • 10–800 mm backgauge travel
  • 5–10 Pcs/min stroke rate
  • E200P controller
  • 37 kW main motor

Features

25 mm Shearing Thickness

Cuts sheet material up to 25 mm thick within the model's stated capacity.

2500 mm Shearing Width

Accommodates sheets up to 2500 mm wide.

10–800 mm Backgauge Stroke

Provides controlled positioning for repeatable cuts.

0.5°–3.5° Shearing Angle

Provides the specified angle range for cutting.

5–10 Pcs/min Stroke Rate

Supports production cutting at the stated operating rate.

37 kW Main Motor

Provides the machine's specified drive power.

E200P Controller

Controls machine and backgauge operation.

Specifications

SpecificationDetails
Shearing Thickness25 mm
Shearing Width2500 mm
Number of Strokes5–10 Pcs/min
Backgauge Stroke10–800 mm
Shearing Angle0.5°–3.5°
Main Motor Power37 kW
Dimensions (H × W × L)3400 × 2200 × 2600 mm
Machine Weight15.2 T
Oil Tank Capacity425 L

Maintenance & care

Inspect and clean the upper and lower blades and cutting area regularly. Check blade condition, clearance, and alignment, and inspect the hydraulic oil level for leaks. Check the backgauge mechanism, guide components, servo drive, electrical and control panel, and emergency-stop circuit. Lubricate mechanical points as required and follow the manufacturer's service schedule for blade and hydraulic maintenance.

May we help?

What thickness of material is the QC11K - 25X2500 designed to shear?
The machine has a maximum shearing thickness of 25 mm.
What sheet width can it accommodate?
The maximum shearing width is 2,500 mm.
What range is available for back barrier positioning?
The back barrier stroke ranges from 10 to 800 mm.

More in Shearing Machine

Request a quote for the QC11K 25X2500