QC12K 8*6000
An NC/CNC hydraulic swingbeam shearing machine with an 8 mm shearing thickness,
- 8*6000 Model
- 8 mm Shearing Thickness
- 6000 mm Shearing Width
- 1°30' Shearing Angle
Product description
The QC12K - 8*6000 is suited for sheet-metal cutting, electrical panel and enclosure fabrication, HVAC and duct components, automotive and auto-component blanks, and general fabrication and industrial sheet preparation. For operation, power up the machine and check the hydraulic and control status. Select the material and thickness settings and verify the blade condition. Set the required backgauge position, place and align the sheet against the gauge, and activate the shearing cycle. Monitor the cut and check the first piece for dimensions and edge condition. Continue production within the model's stated capacity, then remove cut pieces and scrap before shutting down and cleaning the machine.
- Handles sheet thickness up to 8 mm
- 6000 mm cutting width supports the model's stated sheet size
- 600 mm backgauge travel supports repeatable positioning
- 10 Pcs/min stroke rate supports production cutting
- E200P controller supports controlled backgauge operation
- Hydraulic shearing provides controlled cutting force within the specified capacity
Features
8 mm Shearing Thickness
Supports shearing operations on material up to 8 mm thick.
6,000 mm Shearing Width
Provides a maximum shearing width of 6,000 mm for large sheet applications.
10 Strokes per Minute
Performs up to 10 shearing strokes per minute.
600 mm Back Barrier Stroke
Provides a 600 mm back barrier stroke for material positioning.
1°30' Shearing Angle
Operates with a specified shearing angle of 1°30'.
E200P Controller with Servo Motor
Uses an E200P controller with backgauge servo motor for machine and backgauge operation.
Specifications
| Specification | Details |
|---|---|
| Model QC12K - | 8*6000 |
| Shearing Thickness | 8 mm |
| Shearing Width | 6000 mm |
| Number of Strokes | 10 Pcs/min |
| Backgauge Stroke | 600 mm |
| Shearing Angle | 1°30' |
| Main Motor Power | 18.5 kW |
| Dimensions (H × W × L) | 3730 × 1700 × 1620 mm |
| Machine Weight | 19 T |
| Oil Tank Capacity | 680 L |
Maintenance & care
Inspect and clean the upper and lower blades and cutting area regularly. Check blade condition, clearance, and alignment as applicable. Inspect the hydraulic oil level and check for leaks. Check the backgauge mechanism, guide components, and servo drive. Inspect the electrical and control panel and emergency-stop circuit. Lubricate mechanical points according to service requirements and follow the manufacturer's service schedule for blade and hydraulic maintenance.
May we help?
- What is the maximum sheet width supported by the QC12K - 8*6000?
- The machine has a maximum shearing width of 6,000 mm.
- What is the main motor power of this swingbeam shear?
- The machine is equipped with an 18.5 kW main motor.
- What controller does the QC12K - 8*6000 use?
- It uses an E200P controller with backgauge servo motor.
More in Shearing Machine
- QC11K 6X2500
- QC11K 6X3200
- QC11K 6X4000
- QC11K 6X6000
- QC11K 8X2500
- QC11K 8X3200
- QC11K 8X4000
- QC11K 8X6000
- QC11K 10X2500
- QC11K 10X3200
- QC11K 10X4000
- QC11K 10X6000
- QC11K 12X2500
- QC11K 12X3200
- QC11K 12X4000
- QC11K 12X6000
- QC11K 16X2500
- QC11K 16X3200
- QC11K 16X4000
- QC11K 16X6000
- QC11K 20X2500
- QC11K 20X3200
- QC11K 20X4000
- QC11K 25X3200
- QC11K 25X2500
- QC12K 4*2500
- QC12K 4*3200
- QC12K 4*4000
- QC12K 4*6000
- QC12K 6*2500
- QC12K 6*3200
- QC12K 6*4000
- QC12K 6*6000
- QC12K 8*2500
- QC12K 8*3200
- QC12K 8*4000
- QC12K 8*6000
- QC12K 10*2500
- QC12K 10*3200
- QC12K 10*4000